Small Adapter Start Up Kit, clamping shaft 7mm
€341.00
Available, delivery time: 2-5 days
Product information "Small Adapter Start Up Kit, clamping shaft 7mm"
Practical starter set of the diamond drill spindle or adapter for a quick and successful introduction.
With the comprehensive drill adapter starter set, you can begin drilling sensitive materials right away!
Drill gemstones with a diamond core drill
With a diamond core drill, you can drill up to 800 stones. The practical drill adapter starter set contains everything you need for drilling with a diamond core drill on your conventional drill press. This allows you to drill gemstones, glass, shells, stones or ceramics precisely and with minimal effort. Particularly practical is the core ejector, which operates via a precisely calibrated spring pressure.
Efficient cooling through the drill
Using the diamond core drill spindle is extremely straightforward. Simply clamp the adapter with water connection from the starter set into your bench drill. A domestic water supply or a separate pressure tank provides water for cooling the drill and flushing debris. In this drill adapter starter set, cooling takes place through the drill itself. This allows drilling sludge to be removed quickly. In addition, the diamond drill does not seize and the stone does not crack.
Key data and facts summarized
The diamond core drill spindle included in the starter set is suitable for diamond core drill bits with a diameter from 0.6 mm to 8.0 mm and with connection shank "F". The recommended speed is a maximum of 5,000 rpm. The adapter is equipped with an ejector function so that when retracting, the spring located in the clamping shank of the adapter pushes the core out of the drill. This eliminates the need to remove the drill core manually.
✓Drill adapter starter set
✓Manufacturer: Günther Diamantwerkzeuge
✓Connection shank "F": for shank F - M4x0.5-60°
✓Recommended speed: max. 5,000 rpm
✓Diamond core drill bit: Ø 2.5 mm included
Your new drill adapter starter set at a glance
This package includes 1 small drill adapter set with cylindrical clamping shank in 6 or 7 mm and automatic drill core ejector,
1 water connection,
1 hose of 2 m as well as 1 magnetic base for securing the support inserts.
1 metal insert for the counterpart,
1 plastic insert,
1 centering counterpart and
1 sharpening stone are also included in delivery.
1 diamond drill bit Ø 2.5 mm
Günther Diamantwerkzeuge e.K. Inhaber: Sascha Hilles
Tiefensteiner Straße 210
55743 Idar.Oberstein
Telefon: 0049 6781 33893
eMail: info@guenther-diamantwerkzeuge.de
Herr Sascha Hilles
Tiefensteiner Straße 210
55743 Idar-Oberstein
Telefon: 0049 6781 33893
eMail: info@guenther-diamantwerkzeuge.de
Warnhinweise bitte beachten
- Keep machine and accessories out of reach of children.
- ALWAYS wear eye protection. Do not use the device for purposes other than its intended use.
- Do not drill using excessive force.
- Keep fingers and other extremities away from the drill tip.
- Due to water usage, do not drill directly near electrical outlets.
- Ensure that the drilling machine is disconnected from the power supply before removing or installing drill bits.
- Please check that your circuit breakers (RCD/FI) are functioning properly, as water may cause electric shock!
- Wear a hair net or tie back hair before use to prevent entanglement.
- Attach the water hose to the drilling machine to avoid unwanted twisting.
- The magnetic base has strong attraction. Be careful to avoid injuries.
- These bullet points are not listed in order of importance. Please use common sense when operating power tools.